Specification
| Material | Polyetersulfone |
|---|---|
| Application | Water, Food and Beverage, Pharmacy, Semiconductor |
| Type | Membrane Filter Cartridge |
| Diameter | 70mm (2,8'') |
| Cartridge length | 254mm (10”), 508mm (20”), 762mm (30”), 1016mm (40”) |
| Micron | 0.04, 0.1, 0.2, 0.45, 0.65, 1.2 |
| Adapters | Doe / Double open end, Code 3 / Single open end with Flat closed and external 222 o-rings, Code 7 / Single open end with Fin end, 2 locking tabs and external 226 O-ring, Code 8 / Single open end with fin end and external 222 O-rings |
| Cartridge treatment | Standard - Cleand and Flushed with pyrogen-free water. , Rinsed - Ultra-clean, pulse flushed to give a system resistivity of 18MΩ.cm |
| Seals | Ethylene Propylene, Viton, Nitrile, FEP Encapsulate Viton, FEP Encapsulate Silicon |
BorsoPes-Biological +
Description
The BorsoPes-Biological+ is a double layer PES (polyethersulphone) membrane filter candle. The BorsoPes-Biological+ Membrane Filter cartridges are available in micronages 0.04µm, 0.1µm, 0.2µm with a Log reduction value 10^7 and 10^9. The BorsoPes-Biological+ uses a large filter area of advanced PES (polyethersulphone) membrane and features a pre-filtration layer. This double layer membrane filter made of natural hydrophilic Polyethersulphone media exhibits high flow rates and low binding of the active ingredients.
The BorsoPes-Biological+ Membrane Filter cartridges are available in micronages 0.04 micron, 0.1 micron, 0.2 micron with a Log reduction value 10^7 and 10^9.
BorsoPes Biological Membrane Filter cartridges are 100% integrity tested during production using the forward flow diffusion test.
Materials of Manufacture
Filter media: Polyethersulphone
Membrane support: Polypropylene
Irrigation mesh (support): Polypropylene
Drainage Layer: Polypropylene
Inner core: Polypropylene
End fittings: Polypropylene
Outer Support: Polypropylene
Support ring: Stainless steel